D-Link DSL-2540B ADSL2 2+ Modem with 4-Port Ethernet Router
Specification
- Mfr Part Number: DSL-2540B
- Features:
- Supports The Latest ADSL Standards for Superior Performance
- Access a High-Speed DSL Connection and Share The Internet
- Connect upto 4x Computers or Other Ethernet-Enabled Devices
- ADSL Standards:
- Multi-mode
- Full-rate ANSI T1.413 Issue 2
- ITU-T G.992.1 (G.dmt) Annex A/C/I
- ITU-T G.992.2 (G.lite) Annex A/C
- ITU-T G.994.1 (G.hs)
- ADSL2 Standards:
- ITU-T G.992.3 (G.dmt.bis) Annex A/J/K/L/M
- ITU-T G.992.4 (G.lite.bis) Annex A
- ADSL2+ Standards: ITU-T G.992.5 Annex A/L/M
- Data Rates: Downstream - Upto 24Mbps; Upstream - Upto 3.5Mbps
- ATM/PPP Protocols: ATM Forum UNI3.1/4.0 PVC - Upto 8 PVCs; PPP over ATM; PPP over Ethernet
- Network Protocols and Features:
- Ethernet to ADSL Self-Learning Transparent Bridging
- Internet Control Message Protocol (ICMP)
- IP Static Routing
- Routing Information Protocol (RIP, RIPv2)
- Network Address Translation (NAT)
- Virtual Server, Port Forwarding
- NAT ALGs: MSN Messenger, FTP, CUSEEME, H323_Q931 (Netmeeting etc.), H323_RAS, ICQ, etc.
- Dynamic Host Configuration Protocol (DHCP)
- DNS Relay, DDNS
- IGMP Proxy
- Simple Network Time Protocol (SNTP)
- Firewall:
- Built-in NAT
- MAC Filtering
- Packet Filtering
- Stateful Packet Inspection (SPI)
- Denial of Service Prevention (DoS)
- DMZ
- VPN: Multiple IPSec/PPTP/L2TP Pass-through
- QoS: Port-based Priority; 802.1p (0~7) Priority
- Configuration and Management:
- Web-based GUI Configuration
- ADSL/ADSL2/ADSL2+ Manual Selection and Auto Fallback
- Auto VPI/VCI Detection
- Configuration Backup and Restore
- Ports: RJ11 - ADSL Port; RJ45 - 4x 10/100 Ethernet Ports
- LEDs: Power, Status, DSL, LAN, Internet
- Minimum System Requirements: Subscription with DSL Internet Service Provider; Computer with a Network Interface Card
- Certifications: FCC Class B, CE, RoHS, CSA
- Dimension (WxDxH): 7.6 x 5.9 x 1.3 inch
- Weight: 0.7 lbs
| Our Price: | $95.28 |
∞
