ENCORE ENDSL-AR4 w 4-Ethernet&1-USB ADSL Modem
Specification
- Mfr Part Number: ENDSL-AR4
- Supported ADSL Standards:
- ANSI T1.413 issue 2
- ITU-T G.992.1 (G.dmt)
- ITU-T G.992.2 (G.lite)
- G.994.1 (G.hs, Multimode)
- ITU-T G.992.3 (ADSL2 G.dmt.bis)
- ITU-T G.992.4 (ADSL2 G.lite.bis)
- ITU-T G.992.5 (ADSL2+,Annex A, B, I, J, L & M)
- Reach Extended ADSL (RE ADSL)
- ATM Support:
- Support upto 8 PVCs ATM Forum UNI 3.1/4.0 PVC Traffic Shaping UBR, CBR, VBR-nr
- Multi Protocol over AAL5 (RFC1483 / 2684)
- Classical IP over ATM (RFC 1577)
- OAM F4 and F5 segment end-to-end loopback, AIS, and RDI
- OAM cells
- VC and LLC Multiplexing
- VPI is 0-255 and VCI is 32-65535
- ATM SAR (Segmentation and Reassembly)
- PPP over Ethernet (RFC 2516)
- PPP over ATM (RFC 2364)
- PPP over PAP (Password Authentication Protocol; RFC1334)
- PPP over CHAP (Challenge Authentication Protocol; RFC1994)
- Bridging and Routing:
- Ethernet to ADSL self-learning
- Transparent Bridging (IEEE 802.1D)
- IP routing-RIPv2 (backward compatible with RIPv1)
- Routing (TCP/IP/UDP/ARP/ICMP)
- Static IP routing
- ICMP (Internet Control Message Protocol)
- IGMP (Internet Group Management Protocol)
- IP Multicast IGMP v1/v2
- MIB II Support (RFC1213)
- PAT (Port Address Translation)
- IP Management:
- NAT (Network Address Translation)
- NAPT (Network Address and Port Translation)
- DHCP Server/Relay/Client (WAN port)
- VPN (IPSec, PPTP, L2TP) Pass-Through
- DNS Proxy
- DDNS
- UPnP support
- Security:
- PAP (Password Authentication Protocol)
- CHAP (Challenge Authentication Protocol)
- User authentication for PPP
- Password Protected System Management
- VPN (IPSec, PPTP, L2TP) Pass-Through
- HTTP Web-based management:
- Firmware upgrade via FTP / TFTP (Web-based)
- SNMP Support
- WAN and LAN connection statistics
- Selection of Bridge or Router Mode
- Configuration of VCs (Virtual Circuits)
- Configuration file backup and restore
- Hardware Interface:
- 1x USB port compliant with USB v1.1, full speed (12Mbps)
- 4x RJ45 ports compatible with IEEE 802.3/802.3u, 10/100Mbps auto selection
- 1x RJ11 port for ADSL connection
- 1x Power switch button for power on/off
- 1x reset button for restoration of factory default setting
- Support Operating Systems: Windows 9X/ ME/ 2000/ XP; Linux; Mac
- Power Requirement:
- Power Adapter: Input - 110/230 ±10% VAC, Output - 12VAC, 1000mA
- Power Consumption: Less than 10W
- Certification: FCC part 15, CE mark
- Package: Retail
| Our Price: | $50.26 |
∞
